“A place for every thing

and every thing in it’s place.

That’s the way to sure success.”

There is nothing more convenient and peaceful than having a place on your own where you can do all your experiments without disturbance. For our work it does not take much to achieve that.

I use a simple rack for my work now. It has all my chemicals, labware and place for doing the work. On top, I keep the work. It has a test tube stand. A small plastic container to dispose chemicals, another small bottle to keep little distilled water to give final rinse to the lab ware. Rest keep changing on the need. I have a small pad of insulating material to keep hot bottles, glassware. Two spirit lamps for heating and glass works. I do take a little liberty of using few labware – it is there with me for last thiry years – two 100 ml beaker and two 250ml flask, besides couple of test tubes. These come handy as you can easily heat them and watch what’s going on inside. But these are not at all essential. Normal bottles would do just right.

If you have luxury of a big place available for your work, then you may spend a few buck on a Lab table. I had one such during my student days. Very convenient but takes lot of space.

Modern cramped flats where space is in big premium, you can probably get a wall unit made. The sketch given below will serve most requirement. You can extend the rack on top or bottom to store more items and chemicals. Drop down lid folds away to release space when it is not required. At the same time it is ideal to save unfinished work. If you have toddlers around in the house, it is essential that you keep all your chemical under lock and key.

Chemistry of electricuty – let’s explore battery

Enough of talking about resource. Let’s get started with our first experiment. We shall see how a battery work and also salvage some raw material for our next experiment.
For this you need two exhausted zinc battery. Do not try this with alkaline cells or rechargeable ones – they contain some pretty corrosive chemical that we are not yet equipped to handle. You will require atleast two batteries to get material for our next experiments. That should not be a difficult task I suppose. Big UM3 size batteries are good, but AAA cells will also do.
If you have paper covered battery then your work is simple. But most batteries now have a metal leakproof jacket – it makes the task a bit difficult. Carefully with help of a plier remove the outer jacket. Inside you will find a grey colored tube – which should be heavily perforated by now by the corrosive chemical reaction that takes place inside the battery.
Carefully open the zinc casing from top. Inside you will find a dirty mixture of black powder and some paste. THese are manganese dioxide and ammonium chloride mixture. There will be some glue, and graphite powder. At the center there is a black rod – made of gas carbon. We need these rods in intact condition – take care not to break them.
Carefully disassemble the different parts on a old newspaper.scrape resedue out of zinc casing. Now pour the black mixture of MnO2 & NH4CL in a wide mouthed bottle. Pour about 70ml of water and mix it well to dissolve all soluble chemicals. If required pour a bit more. Decant and
then filter using funnel and filter paper. Old news paper makes excellent filter paper. The black resedue is primarily manganese di-oxide and solution has primarily ammonium chloride. Dry the solution in a shallow dish. You will get white powder of ammonium chloride. Some Zinc chloride and other impurities will also be present. Wash the zinc casing in tapwater.
Once you are done, save the four parts – Zinc, Manganese di-oxide, gas carbon rod and ammonium chloride in separate container. We shall use them in our later experiments.
Wash the zinc casing keep it aside in a wide mouth bottle.

Setting up a home chemistry lab

Chemistry or for that matter all science experimentation has become obsolete as hobby. I used to have a small chemistry laboratory when I was kid and spend countless hours in doing my small experiments. This has helped me immensely in understanding science and many other related subjects in most enjoyable way. Now I am father of two kids and wanted to help my kids setup some lab of their own. To my utter surprise, I found science kits are taboo subject. Trying to buy chemical reagents look down upon. If you ask around you are viewed as potential terrorist or a drug baron.
As a kid 30 years ago, I had no difficulty in getting small quantity of nitric acid. My friendly neighborhood store owner did enquire me about the purpose and cautioned me about the hazard. But once he was satisfied that I do intend to use these for my experiment he encouraged me and actively helped me to source many other things that I did not know where to get. But
things have changed. Now, most of those chemicals are not available easily. Even where these are available, there you can only get them in bulk quantity on 1 litre odd pack. For home experiments I need hardly 50ml of these. I understand, keeping even these at home has become a law and order issue in some part of the world. With all these, I thought of writing this blog on doing simple chemistry experiments at home.
You don’t need to spend much for doing most chemistry experiments. Only thing you require is to know the chemicals available around you and innovate to use them. In fact you can start a chemistry laboratory with an investment of as little as Rs. 50/-. This is my aim, to help all to learn chemistry by the fun way.
To setup your own small chemistry first think of the space that you can get. You won’t need a very big space. A corner of a balcony, a space below staircase is more than sufficient for your purpose. You need a place to keep your things handy. A small rack is excellent for the purpose. A small table will be a luxury. If you are constrained for space, consider a 4inch deep wall mounted rack. At bottom of the rack you can fit a drop down lid that will serve as your work table. Whatever you get, plan where will keep your things and keep things in orderly manner.
“Keep a place for every thing
and keep everything in its place.
That is the road of sure success.”
I give my suggested layout for all the three category of setup. This is by no means the ultimate. Use whatever available to you easily and improvise to suit your requirement. To do the experiment that I will describe in this blog later, you will need three wide mouthed jar. Discarded jam or mayonnaise jars will be perfect. You will also need three glass bottle.
100ml medicine bottles will do. You need to keep rather large supply of distilled water. You can buy it from petrol pump or take it from refrigerator or air conditioner. The discharge water during defrosting or from AC outlet is good enough purity level for our experiment. Keep this in
a discarded cold drink bottle. You will also need a supply of glass bottles to keep your chemicals. I prefer, glass bottle with plastic caps for these. I do not have much patient to accumulate them over time and prefer to buy them from junk shop. This way, I can easily get bottles in uniform size and shape easily. You will require about twenty bottle for the chemicals. You will also need a funnel, a plastic one will, a glass one is excellent. If you can get a pack of filter paper. Even newspaper can be used as filter paper but the result may not be consistent.
You will need about 2m of glass tube of 5mm dia. and 1m of rubber tube. Six test tube and about ten rubber stopper will get you started with your own chemistry lab. Rubber stoppers requires some planning. Below, I give bare minimum requirement:

Stopper for test tube

  • Without any hole – 3 Nos
  • With 1 hole – 1
  • With 2 hole – 2

Stopper for 100ml bottle

  • with 2 hole – 3
  • With 1 hole – 3
  • without hole – 2

The hole should allow 5mm glass tube to be fitted snugly. You should try to get the stoppers with pre-drilled holes or get someone to make the holes for you. If you fail to do either then may be you should consider buying a cork borer.
You will also need a pliers and a battery eliminator for some of the experiments. With these, you are ready to venture into the land of chemicals.